اخر اصدارات من كود الحريق - NFPA 2017

NFPA  2017 

كلما  بنشتغل  ب NFPA   كمصدر  رئيس   في  تصميم  الحريق   ومن  المعروف  ان  NFPA   بينزل  مجموعه  من  اكواده  كله   سنه    علي  فترات   زمنيه  3 سنين


من  الاكواد  NFPA   نزلها   في  الفتره  الاخيره   وتحمل  اصدار   2017

1- NFPA 15: Standard for Water Spray Fixed Systems for Fire Protection

Purpose. The purpose of this standard shall be to provide the minimum requirements for water spray fixed systems based on sound engineering principles, test data, and field experience.

DOWNLOAD 

2- NFPA 58: Liquefied Petroleum Gas Code

 This code shall apply to the storage, handling, transportation, and use of liquefied petroleum gas (LP-Gas). ... It is this property that allows the transportation and storage of LP-Gases in concentrated liquid form, although they normally are used in vapor form.

DOWNLOAD 


3- NFPA 61: Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities

Purpose. This standard shall provide the minimum requirements necessary for safety to life and property from fire, flash fire, and explosion posed by agricultural and food processing combustible dust and represents the industry and commodity-specific requirements for agricultural and food processing.

DOWNLOAD

4-NFPA 780: Standard for the Installation of Lightning Protection Systems

Purpose. The purpose of this standard shall be to provide for the safeguarding of persons and property from hazards arising from exposure to lightning 

DOWNLOAD


5-NFPA 664: Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities

Purpose. The purpose of this standard shall be to provide minimum requirements, with due function, for the design, operation, and maintenance of woodworking and wood processing facilities for the safety to life, property protection, and mission continuity from fire and explosion.

DOWNLOAD


6- NFPA 70: National Electrical Code®

Purpose.

(A) Practical Safeguarding. The purpose of this Code is the practical safeguarding of persons and property from hazards arising from the use of electricity. This Code is not intended as a design specification or an instruction manual for untrained

persons.

(B) Adequacy. This Code contains provisions that are considered necessary for safety. Compliance therewith and proper maintenance result in an installation that is essentially free from hazard but not necessarily efficient, convenient, or adequate for good service or future expansion of electrical use. Informational Note: Hazards often occur because of overloading of wiring systems by methods or usage not in conformity with this Code. This occurs because initial wiring did not provide for increases in the use of electricity. An initial adequate installation

and reasonable provisions for system changes provide for future increases in the use of electricity.

(C) Relation to Other International Standards. The requirements in this Code address the fundamental principles of protection for safety contained in Section 131 of International Electrotechnical Commission Standard 60364-1, Electrical Installations of Buildings. Informational Note: IEC 60364-1, Section 131, contains fundamental principles of protection for safety that encompass protection against electric shock, protection against thermal effects, protection against overcurrent, protection against fault currents, and protection against overvoltage. All of these potential hazards are addressed by the requirements in this Code.

DOWNLOAD